Sphda120 Pioneer Wont Play Misic Over Blue Tooth
Hello MichaelFronczak, my name is Irisdiel and I am an independent advisor.
I suggest you follow the instructions down below.
Method 1:
-Check if the Bluetooth service is running:
-Press Windows Key + R, type services.msc and press Enter.
-Search for Bluetooth support service.
-Check if it is started, if not Right click on the service and click on Start.
Method 2:
-Reinstall the Bluetooth driver following these steps:
-Press Windows key + X and select "Device Manager"
-Expand "Bluetooth" and right-click on the driver.
-Select "Uninstall", check marked "delete the software for the device" and select "OK" (after that, you can see there is no "Bluetooth" expansion on "Device Manager")
-Select "Update Driver Software".
-Restart the computer.
Method 3:
Restart Bluetooth wireless connectivity:
-From the Start screen, swipe in from the right edge of the screen, and then tap or click Settings.
-Tap or click Change PC settings.
-Tap or click PC and devices, and then tap or click Bluetooth.
-Under Bluetooth, tap or click to turn Bluetooth Off, and then tap or click again to turn Bluetooth
Hope this helps!
Thank you and good luck,
Regards- Irisdiel H.
2 people found this reply helpful
·
Was this reply helpful?
Hello & thank you for the reply.
Previously, I had done Method 1 and Method 3 multiple times, with no luck.
Method 2 worked temporarily. I followed the directions, was able to add my receiver and play music through it. However, this brought up a couple of other issues:
1) While I could play music through it, I was unable to configure it - everything was grayed out. My receiver is a 5.1 system, so I have five speakers and a subwoofer but windows had it as a 2-channel system and only played music out of the the two front speakers and I was unable to change this.
2) Even worse - and I'm not sure if this is a Windows 10 thing or a receiver thing - but as long as my laptop was open, the source of the receiver would change to Bluetooth every 15-20 seconds. I would turn it back to TV, then it would automatically change back to Bluetooth. The only way to get it to stop was to disconnect it from the Bluetooth devices.
3) This morning, I tried to Connect the receiver again and was right back where I started. In order to get it to work as speakers again, I had to follow Method 2 again and I'm not sure why.
2 people found this reply helpful
·
Was this reply helpful?
Hello,
Thank you for writing to Microsoft Community Forums.
I understand your concern, let us try steps to resolve this issue . I suggest you to try the receiver on a different PC and check if you are able to play the audio normally. If you don't face this issue on the different PC, try few troubleshooting steps to fix this issue and check if that helps. Refer the section under 'Troubleshooting problems with Bluetooth accessories' and follow the steps under 'Audio' from the following article on 'Fix Bluetooth problems in Windows 10'.
Hope it helps.
Sandeep Kumar M
Microsoft Community – Moderator
2 people found this reply helpful
·
Was this reply helpful?
Source: https://answers.microsoft.com/en-us/windows/forum/all/bluetooth-pairs-and-connects-but-wont-play-audio/85421d14-fd5b-4b08-992b-2b0235fc97c5
0 Response to "Sphda120 Pioneer Wont Play Misic Over Blue Tooth"
Post a Comment